Start

From the home page of @trip mobile, open Start to initiate a tracking activity.

 

    Activity mode
  Select a track logging mode to record your positions. Sports and Travel modes are system defaults, or you may create your own logging mode by selecting User mode 1 or 2.

   

    Log interval
  Enter the interval time (mm:ss) to log every position in your movements. For example, 00:10 means data logger will track your position every 10 seconds.

 

    Power saving
  Enable or disable power saving function of your GPS device used to receive positioning data. If you're using an external GPS device to log your tracks, an error message will appear when you start tracking, alerting you that this option does not apply even if you select Enable.

 

    Start
  After configuring the settings above, press Start on the bottom of the screen to proceed. Enter a Track Description, and press OK to begin tracking. Use the navigational keys/wheel/buttons on your mobile phone to move between logging pages where positioning data are being recorded:
 

 

 

    Log
  Press Log if you would like to acquire the positioning data of your current location.

 

    Stop, Pause, and Exit
  Press Options anytime during tracking, and select Stop or Pause to end or hold your current tracking activity. Select Resume to continue tracking after being paused. Select Exit if you would like to stop tracking and also exit @trip mobile application. Press Home after you stop tracking, and return to the home page of @trip mobile.

 

See Tracks and Settings for more configuration details.